Adding passenger grips on top on saddle bags

Pab22554

New member
I recently got the Honda saddle bags put on my 700n. I wanted the passenger grips to clean up the look a bit. Based on the official installation instructions, it looks like I need 8mm socket bolts.

According to step 14 on page 10 anyway.
http://powersports.honda.com/documentum/MW01/08L73-MJF-A00ZP.pdf

Anyone know a place to order these? The ones I have aren't long enough to reach through the grips, saddlebag stays, and the collars underneath.
 

ofdave

Member
Your local Ace hardware should have them too.
Take a short one with you just to check they match.
Make sure each bolt is the right size. I have bought 3 or 4 bolts and found one to be the wrong size .when I got home. Then have to do a second trip. Seems people don't put them back in the right place
And they don't have to be socket head, hex head will work also. Get stainless if you can.
 

burdicda

Member
Take a sample bolt
Find a nut that fits it perfectly
Pay attention to length
Compare all before checkout...
I replaced all the bolts in mine from Ace
 
Top